CT SCANNERS currently available for sale all still installed and in good working condition unless otherwise noted

Call Pamela King at 843 884 7972 for further information

 

GE

• 1999 GE GXI, dual console, Advantix 2.0x4.0, Z Advantix Workstation, Invision Ceiling Mount injector, Xact table, new x ray tube 2006, been under GE service, was in good working condition prior to OEM deinstall, currently in warehouse.
• 2002 GE lightspeed plus, single console, tube age Sept 2005, quad slice, can do reconstructions. Currently installed, working and available for removal now.
• 2004 GE Discovery ST-8 PET CT mobile – will do viability studies with FDG, has BGO crystal, 53 feet long including generator and A/C, 102 inches wide, dual injection hot lab. Comes with PET CT fusion Image registration software that allows you to bring in old CT scans and fuse them in. Xeleris workstation.  Available for removal now.

Siemens

• 2004 Siemens ECAT Accel mobile PET in trailer 48x8. Gantry mounting plate(EXACT/EXACT HR+), isolation transformer(US), Gantry air/water chiller(60Hz), ACCEL Sources kit(1^st Fill.), uninterruptible power supply, condonics imager large format, Ethernet interface hub (10/100 Mbit) E.Soft V, English language kit, e.soft, 21monitor, e.soft archival, CD-R, e.soft PET package, ECAT to DICOM image translator, myocardio perfusion(for advanced studies you need gantry software 30K upgrade), LSO crystal, uptake and incubation area, extra spark workstation. Working and available now.
• 1998 Siemens Somatom Plus 4 Expert CT single slice scanner with UFC Detectors Tube 3 years old.  Only standard options Gantry count 9, Container IMS Storage Device HD/MOD Endast Operator Console Software version VC10C. Currently installed, working and available for removal now.
• 1996 Siemens Somatom Plus 4 Power CT Scanner single slice .50/60Hz system. Total gantry scan seconds 1,296,721 as of May 2004. Image processor model SM15 with 1.7GB MOD drive for image archive. Does not include an imager or laser. Currently deinstalled
• 2001 Siemens Emotion Duo Helical Two Detector, .8 sec Helical scan speed, software upgraded 9/1/2003, gantry scans 421,0980 sec, type scans 347,329 sec tube is 2.5 years old, currently installed and working fine, available now for removal

Philips

• 1997 Philips Tomoscan M Portable CT, single operator consaole, 6.0 mhu tube, SunSparc/Image Processor computer, 5.25 inch optical disk 256 gray scale 512x512 display matrix, lightweight scanning gantry, scan times 2,4,6 sec, patient support, needs batteries (about 5K cost) was removed 2 years ago and is currently in storage.

• 2000 Philips Aura, tube age 2005, tube slice count 209,000, gantry slice count 1,292,940, single slice system, under Phillips service. Currently installed, working and available for removal now.
• 2000 Philips MX 8000 Quad, simultaneous four slice acquisition, 120,000 scan seconds on a Akron B 6.5MHU Tube, .8 Second 360 degree scan time, slimscan 0.5mm slice thickness, 60kW high frequency generator, MX view workstation, coronary artery calcium scoring (CAC), heart-beat-CS Cardiac scoring package, cardiac gating, cardiac score, voyager 3D-Endoscopic visualization package, Voyager 4D Angio Visualization package, 18.0 GB raw data storage memory, 100 seconds of continuous multi-slice capability, ESP IIQ Easy scan planning, DICOM3.0/DICOM modality work list, ultraimage, BolusPro Ultra, 4-D Angio volume rendering, 3D imaging, Denta CT. Currently installed, working fine and available for removal now.
• 2002 Philips Diamond Select ACQSIM CT system, ACQSIM CT Gantry(85cm Gantry, 60cm FOV), 56kW generator option, Rhino 6.5A tube, Operator’s table(54”x30”) and operator’s chair, ZAP ultra spiral package, flat table insert, ACQSIM CT low voltage slip ring gantry, patient table, operator’s console, 64 Bit sun UltraSPARC RISC processor, 18GB image disk-18GB system disk-18GB raw data disk, 8mm cassette tape drive, 4 to 5 second reconstruction, ESP graphic user interface, oracle Rx, spiral page, spiral profile, ultra image, MPR (Multiplaner Reformatting, DICOM 3.0 Send/Receive/Query/Retrieve, DIOM print interface, patient positioning accessories, 85cm Gantry aperture for easy patient access, positioning and immobilization, 60cm field of view, plus/minus 30 degree Gantry tilt-roaring silence DAS with DC, RAD technology minimizes electronic noise and provides maximum resolution for single slice and spiral scanning, consistent image quality, special resolution- 15Lp/cm spatial resolution in axial and spiral scan modes, low contrast resolution, low voltage slip ring rotation for low noise image quality; fast installation and easy fitting X-Ray System 56kW Generator 56kW high frequency, on-board, solid state generator. Currently installed, working and available for removal now.

Toshiba

• 1996 Toshiba X-speed, single console, 115,000 tube slice count, Toshiba computer – no disk drives or storage, not spiral. Currently installed, working and available for removal now.

Carbon Fiber Couch Top

• For GE Lightspeed scanner, Med Tech 2001 in excellent condition. Available now.

 

If you don’t see what you need here, please call us  843 884 7972